Glossary

6mm GT or 6GT, the New 6 on the Block.

The GT in 6mm GT, stands for George (as in George Gardner from GA Precision) and Tom (as in Tom Jacobs from Vapour Trail Bullets), the two guys who developed the cartridge, out of the need to have a 6mm cartridge that can use the forgiving propellants that the 6BR, 6BRX, 6BRA and 6mm Dasher use providing large nodes making load development easier for each new barrel, whilst still being able to feed from a magazine reliably like a 6mm Creedmoor.

Best Hand Priming Tool | Hands-On Review (No Pun Intended)

Finding the best hand priming tool for reloading is important is you want to eliminate the variables in your quest for precision reloading and rifle shooting.

6mm SLR, the Ultimate 6?

With the explosive growth in precision rifle, long range and racegun shooting sports the past few years, the constant search for a better or ultimate bullet for these purposes has also intensified, with guys necking down, wildcatting or blowing out the shoulders of every single cartridge they can find. The focus being especially on 6.5mm […]

Introduction to the Ladder Test, Shooting and Aiming

Loading your own ammunition can be beneficial, but handloading or reloading can be an intimidating process when trying to determine the true potential of your loads and rifle. Here we provide a basic introduction to load development. One reason why hunters handload or reload ammunition, other than being cheaper and choosing better components, is to […]

Why The 6.5 Creedmoor Is The Best Overall Cartridge

After the initial hype of the 6.5mm Creedmoor cartridge, it seems to have kept growing commercially in popularity, with 6.5 Creedmoor chambered factory rifles available from most of the large manufacturers and loaded ammo in this caliber readily available on most shelves in the US. This against a lot of critique among seasoned shooters and […]

The 6XC II

The 6XC II Chamber works perfectly with the Norma 6XC brass and resolves the “sticky bolt lift” issue. The original 6XC chambering was designed based off the usage of 22-250 brass which typically has a web diameter in the range of .461″-.463″. The area of the chamber just forward of the web on the original […]

Footer

Disclaimer